Secure your pool cover to prevent it from flipping due to heavy winter winds. Use these Cover Clips to fasten your pool cover and keep firmly in place. These cover clips are made from the finest materials to ensure their durability and good performance.

How to Install Above Ground Pool Covers Using Cover Clips

1. Before setting up the winter cover on your pool, make sure that all of your winterizing has been completed. You may not want to have the hassle of removing the cover again for this unfinished process. Be ready with your Cover Clips.

2. Make sure that inside and outside of your pool is clean.

3. Place your cover over the pool. Make sure that it is even all around.

4. Thread the cable through the grommets or loops around the edge of the pool cover. Secure the pool cover by inserting the cable into the winch.

5. Make sure that there is no other extra material that is hanging down to resist the wind from getting under the pool cover.

6. To prevent any damages that causes by the wind, use Cover Clips that fasten the top rail of the pool and hold firmly the cover in place. The number of cover clips depends on the size of your pool.